Secondary Steel Framing Systems

Building Features

Steel Framing Systems
   • Primary
   • Secondary
Steel Paneling Systems
   • Roof Paneling
      • Standing
      • Ribbed
   • Wall Paneling
Other Panels

	Cold Formed Shapes
	Girts, eave struts, purlins, gable angles and base members will be cold-formed from steel conforming to ASTM specification A-1011, Grade 55, SS or ASTM A-1-11-HSLAS, Grade 55, Class 1.

	Wall Base Conditions
	Our standard base condition uses this member without a panel notch in the concrete foundation. The Base Angle/Trim will provide support for wall panels and will close off the open ribs at their base. Dimensions of member are so that it can be used together with a panel notch, if desired bythe customer.

	Girts
	Girts are rolled formed "Z" sections, 8.5 inches or 10 inches deep or they are roll formed "C" sections which are 8.5 inches deep. Each flange of the members has a stiffening lip formed at 50 degrees to the flange on "Z"s and at 90 degrees on "C"s.

	Purlins and Eave Struts
	The purlins are roll formed "Z" sections which are 8.5 inches or 10 inches deep. Each flange of the "Z" has a stiffening lip formed at 50 degrees to the flange. The eave struts are roll formed "C" sections which are 8.5 inches deep with 3 and a quarter inch wide top and bottom flanges; or brake formed "C" sections which are 10 inches deep with 3 and a quarter inch wide top flange and 4.5 inch wide bottom flange.